RM10.80 - RM16.80 RM12.00 - RM18.00
MB-06 RC Servo Motor Controller and Tester Hobby Kit
End In :
Price RM10.80 - RM16.80 RM12.00 - RM18.00
Product SKU MB-06
Brand Mybotic
Size (L x W x H) 4 cm x 4 cm x 2 cm
Points Needed 1200
Availability 60
Mybotic MB-06
30 left
30 left
Quantity
Description
Highlight

Features:

  • Uses 555 timer IC.
  • The kit will control your RC servo motor up to 180 degrees.
  • Able to control one (1) RC servo motor at a time.
  • Non-programmable kit.
  • Two modes of control: Potentialmeter mode or button mode.
  • The buttons can be extended using the terminal block.
  • Recommended input voltage: 5V to 6V DC.
  • Self assembly.
  • Size: 44 mm x 50 mm

 

Description:

This board controls a servo motor by using the buttons or the potentiometer. By using buttons, the servo motor will moves to either 0 degree or 180 degrees. The potentiometer able to control the servo motors position by turning the potentiometer. The 555 IC is configured in astable mode to generate the PWM for the servo motor to work.A servo motor is controlled by sending a series of pulses to it which is the pulse width modulation. Depending on the length of the pulse it will turns to a specific angle. A pulse must be sent to the servo every 20 milliseconds. The pulse length will vary from 1ms to 2ms. A 1ms pulse will turn the servo to 0 degrees and 180 degrees for 2ms. 

 

This is example project for inovation dustbin using external button without touch a dustbin cover:

By adding the 5V-30V Trigger Delay Relay Timer Module, you may also build a Contactless Smart Dustbin. The way to build it is easy and you may refer the tutorial video below or you may support us by just get this complete set here.
 


Features:

  • Uses 555 timer IC.
  • The kit will control your RC servo motor up to 180 degrees.
  • Able to control one (1) RC servo motor at a time.
  • Non-programmable kit.
  • Two modes of control: Potentialmeter mode or button mode.
  • The buttons can be extended using the terminal block.
  • Recommended input voltage: 5V to 6V DC.
  • Self assembly.
  • Not Included Servo Motor
  • Size: 44 mm x 50 mm

 

You may need this recomended type of Servo Motor:

Packaging list:

  • 1x MB-06 RC Servo Motor Controller and Tester Hobby Kit
  • 1x MB-06 RC Servo Motor Controller and Tester Hobby Kit User's Manual V1.0

 

Attachment:

 

 


Additional Information:

  • Operating Hours: 9 a.m - 6 p.m (Monday - Friday) , 9a.m - 1.00p.m (Saturday)
  • Same day delivery *Applicable to orders made before 12 noon*
  • Fast Shipping
  • Ship from Johor, Malaysia

 

 

What's in the box

Packaging list: